Yearly Furnace Care From Our Richmond Hill Office
Our Richmond Hill office is here in town, so a tune-up is a short drive for our technicians rather than a trip across the region. Each visit covers the whole furnace: we fit a new filter, clean the flame sensor and burners, clear the condensate lines and take combustion readings, then talk you through what they show.
You are dealing with a local HVAC contractor in Richmond Hill that is TSSA registered as a heating contractor, HRAI registered, gas licensed, insured and bonded, with factory-trained technicians on every call. When a reading points to a worn part, we explain it plainly and can arrange furnace repair in Richmond Hill at a price you agree first.
Inside a Furnace Tune-Up Visit
Our technicians work through the same six areas on every furnace, and each one is signed off on the report you keep after the visit.
-
Filter and airflow
We fit a new filter and write its size on the report so you can buy the right one.
Without it: A filter packed with dust chokes the airflow, the furnace runs hot and its safety limit shuts the burners off.
Even airflow to every room.
-
Drain hose and floor line
We flush and air-blow the drain hose and the line that runs under the floor, then test the condensate pump.
Without it: When the condensate line clogs, water backs up and a high-efficiency furnace stops itself to stay safe.
A dry furnace room all winter.
-
Pressure switch and inside hoses
Each small hose inside the cabinet is cleaned and blown through, the pressure switch hose included.
Without it: A pinched or wet pressure switch hose tells the furnace its venting has failed, so the burners never light.
The furnace starts first time.
-
Flame sensor and burners
We polish the sensor, clean the burner box and clear out the dust that settles around it.
Without it: A coated flame sensor cannot confirm the flame, so the burners light and drop out a few seconds later.
A steady, even burn.
-
Intake connection and cabinet
We clear the intake vent fitting, then vacuum the dust out of the cabinet.
Without it: Lint and grit drawn in with the combustion air settle on moving parts and wear them sooner.
Cleaner air for combustion.
-
Flue gas and temperature rise
We test the flue gases for carbon monoxide and carbon dioxide, then record the supply and return temperatures.
Without it: A furnace that burns poorly uses more gas and can produce carbon monoxide with no obvious warning.
Measured proof of safe operation.
Tune-Up Services for Your Furnace
If your furnace went in when your street was built, a yearly visit keeps it dependable, and a newer replacement benefits from exactly the same care.
We Remind You Each Year
Sign up for reminders and our office will contact you when the next service is due, so you can pick a date early in the season before the calendar fills.
A Thorough $150 Service
Filter, flame sensor, burner box, drain lines, internal hoses and the inside of the cabinet are all cleaned, and the combustion readings are taken before we leave.
Results Explained On the Spot
Before leaving, the technician walks you through the checklist and the readings, so you know how your furnace is doing and whether anything needs watching.
Your Tune-Up From Booking to Report
Every visit follows the same order, which keeps it thorough and easy to plan around, since most tune-ups take between half an hour and an hour.
-
Choose a Date Early
Call us in late summer or early autumn and we will set a date and an arrival window that suits your household.
-
Note the Furnace Details
Your technician notes the model and serial number, the year it went in, and watches how the furnace behaves before anything is touched.
-
Clean Inside the Cabinet
A new filter goes in, the flame sensor and burner box are cleaned, and the dust inside the cabinet is vacuumed out.
-
Flush Every Line
Drain hoses, the floor line and the small internal hoses are blown clear, the pressure switch hose is checked and the pump is tested.
-
Test the Combustion
We sample the flue gases for carbon monoxide and carbon dioxide and compare supply and return air temperatures to confirm the heat rise.
-
Go Over the Checklist
You keep the signed checklist with every reading, along with notes on equipment connected to the furnace, such as the humidifier.
Why Richmond Hill Books Tune-Ups With Cozy World
A tune-up is only as good as the technician doing it and the way the results are explained, so these are the standards we hold ourselves to on every visit.
An Office Right Here in Town
Our technicians start their day at our Richmond Hill office, so we know the local subdivisions, from Rouge Woods and Jefferson to the larger lots of Oak Ridges, and the furnaces they tend to have.
Registered and Fully Insured
We are a TSSA registered heating contractor and HRAI registered, gas licensed, insured and bonded, which matters when someone is working on the gas appliance in your basement.
One Price for Any Make
The tune-up is $150 whether your furnace is a Lennox we installed or another brand chosen by the builder, and any repair it uncovers is priced before work begins.
Manufacturer Training
Our technicians are factory trained, so they know what each reading should look like and notice the early signs of a part that is starting to struggle.
Serving Homes Since 1991
Cozy World has kept furnaces running across the region since 1991, as an Authorized Lennox Dealer and a trusted Costco HVAC installer.
What Richmond Hill Customers Say About Us
Many of the furnaces we service in Richmond Hill belong to customers who have booked with us for years, and new calls often come through a neighbour who suggested us. We aim to arrive on time, work tidily and give straight answers about what a furnace needs.
Our five star ratings on Google, HomeStars and Lennox now run into the hundreds. We are HomeStars Verified, and the Better Business Bureau rates us A+ with no complaints on file.
Furnace Tune-Up Questions We Hear Most
When is the best time to book a tune-up in Richmond Hill?
What does a furnace tune-up cost?
How long will the technician be here?
Do you service furnaces you did not install?
Is a yearly tune-up needed while my furnace is under warranty?
Will you remind me next year?
What if the technician finds a problem?
Our home in Oak Ridges is larger than most. Is the tune-up different?
Richmond Hill Neighbourhoods for Furnace Tune-Ups
Most streets in Richmond Hill were finished within a year or two of each other, so the furnaces on a road tend to come due for service together. From Rouge Woods and Jefferson to Mill Pond and Bayview Hill, bookings arrive in waves once the nights turn cold, and up in Oak Ridges, where the lots are larger, the homes and the furnaces that heat them often are too.
Our Richmond Hill office books tune-ups across the whole town and handles the rest of our heating and cooling services in Richmond Hill all year.
- Bayview Hill
- Crosby
- Devonsleigh
- Doncrest
- Jefferson
- Mill Pond
- North Richvale
- Oak Ridges
- Observatory
- Rouge Woods